• KNX switch module KTE110/210/310MS

    1/2/3 concealed opening and closing modules
    ● Embedded input - output small module, featuring 4 - channel DI (Digital Input) input, 4-channel DO (Digital Output) output, and 1-3 channels of 10A relay output
    ● The input ports can be used for lighting control: on/off / dimming
    ● The input ports can be used for curtain control: operation / stop
    ● The input ports can be used for numerical value sending: scene calling / brightness value / temperature value / illuminance value

  • KNX Switch module KTE04R-10K KTE04R-16K

    4 way 10A switch driver/4 way 16A switch driver
    ● It has a scene function
    ● Each circuit has an independent status display and can be set with individual parameters
    ● After the KNX bus power failure, the circuits can still be controlled by manual buttons
    ● A 24V auxiliary power supply is required
    ● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE04R-16S

    4 way 16A switch driver
    ● Mechanical toggle - switch driver with 4 channels of 16A
    ● It can maintain its current state even when the KNX bus experiences a power failure or malfunctions
    ● Manual control remains available after the KNX bus loses power
    ● It can be used for the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE04R-20S

    4 way 20A switch driver
    ● Mechanical toggle - switch driver, with 4 channels of 20A
    ● It can maintain the current state even after the KNX bus has a power outage or malfunctions
    ● Manual control is still possible after the KNX bus loses power
    ● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE04R-20SA

    4 way 20A switch driver
    ● Mechanical toggle - switch driver, featuring 4 channels of 20A
    ● The actual current magnitude of each channel can be detected
    ● It can maintain its current state even when the KNX bus experiences a power outage or malfunctions
    ● Manual control remains available after the KNX bus loses power
    ● It can be applied to the control of lighting, on - off type floor heating, and drycontact signals

  • KNX Switch module KTE08R-10K KTE08R-16K

    8 way 10A switch driver/8 way 16A switch driver
    ● It has a scene function
    ● Each circuit has an independent status display and can be set with individual parameters
    ● After the KNX bus power failure, the circuits can still be controlled by manual buttons
    ● A 24V auxiliary power supply is required
    ● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE08R-16S

    8 way 16A switch driver
    ● Mechanical toggle - switch driver with 8 channels of 16A
    ● It can maintain its current state even when the KNX bus experiences a power failure or malfunctions
    ● Manual control remains available after the KNX bus loses power
    ● It can be used for the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE08R-20S

    8 way 20A switch driver
    ● Mechanical toggle - switch driver, with 8 channels of 20A
    ● It can maintain the current state even after the KNX bus has a power outage or malfunctions
    ● Manual control is still possible after the KNX bus loses power
    ● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE08R-20SA

    8 way 20A switch driver
    ● Mechanical toggle - switch driver, featuring 8 channels of 20A
    ● The actual current magnitude of each channel can be detected
    ● It can maintain its current state even when the KNX bus experiences a power outage or malfunctions
    ● Manual control remains available after the KNX bus loses power
    ● It can be applied to the control of lighting, on - off type floor heating, and drycontact signals

  • KNX Switch module KTE12R-10K KTE12R-16K

    12 way 10A switch driver/12 way 16A switch driver
    ● It has a scene function
    ● Each circuit has an independent status display and can be set with individual parameters
    ● After the KNX bus power failure, the circuits can still be controlled by manual buttons
    ● A 24V auxiliary power supply is required
    ● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE12R-16S

    12 way 16A switch driver
    ● Mechanical toggle - switch driver with 12 channels of 16A
    ● It can maintain its current state even when the KNX bus experiences a power failure or malfunctions
    ● Manual control remains available after the KNX bus loses power
    ● It can be used for the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE12R-20S

    12 way 20A switch driver
    ● Mechanical toggle - switch driver, with 12 channels of 20A
    ● It can maintain the current state even after the KNX bus has a power outage or malfunctions
    ● Manual control is still possible after the KNX bus loses power
    ● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

  • KNX switch module KTE12R-20SA

    12 way 20A switch driver
    ● Mechanical toggle - switch driver, featuring 12 channels of 20A
    ● The actual current magnitude of each channel can be detected
    ● It can maintain its current state even when the KNX bus experiences a power outage or malfunctions
    ● Manual control remains available after the KNX bus loses power
    ● It can be applied to the control of lighting, on - off type floor heating, and drycontact signals