KCMAQS-T7

Air quality sensor
● Can detect temperature, humidity PM1.0、PM2.5、PM10、 Formaldehyde, CO2,and TVOC
● Supports standard Modbus protocol
● Requires 24V auxiliary power supply

KCM6S8IO

Integrated Expansion Module
● 6-way 10A relay output, 8-way DC5V output, 8-way passive dry contact input
● Supports standard Modbus protocol
● Requires 24V auxiliary power supply

K-TAP

Graffiti wireless access point
● When used with a host or TSE100, it can connect to graffiti wireless devices

Homebus Gateway KAC001

KAC air conditioning direct connection gateway
● One HBS interface, one reusable network interface.
● All mainstream brand central air conditioners can be directly controlled via RS485/Modbus RTU.
● Supported brands: Daikin, Toshiba, Mitsubishi Electric, Hitachi, Hisense, York, Panasonic, Samsung, Mitsubishi Heavy Industries, Midea, Carrier.
● An auxiliary power supply of 9 - 30V is required.

Homebus Gateway KAC011

KAC air conditioning direct connection gateway
● One HBS interface, one reusable network interface. It supports up to 16 indoor units in a single air - conditioning system.
● All mainstream brand central air conditioners can be directly controlled via RS485/Modbus RTU.
● It can be directly connected to the central air - conditioner's outdoor unit/indoor unit.
● An auxiliary power supply of 9 - 30V is required.

Homebus Host KAC005

KAC air conditioner directly connected to the host
● One HBS interface, one reusable network interface, and one KNX interface.
● Supports logic control, voice control, remote control, and comes with a visual APP.
● Supported brands: Daikin, Toshiba, Mitsubishi Electric, Hitachi, Hisense, York, Panasonic, Samsung, Mitsubishi Heavy Industries, Midea, Carrier.
● Requires an auxiliary power supply of 9 - 30V.

Homebus Host KAC008

KAC air conditioner directly connected to the host
● One HBS interface, one RS485 interface, one RS232 interface, and one reusable network interface.
● One KNX interface. It supports logic control, voice control, remote control, and has a visual APP.
● Supported brands include Daikin, Toshiba, Mitsubishi Electric, Hitachi, Hisense, York, Panasonic, Samsung, Mitsubishi Heavy Industries, Midea, Carrier.
● An auxiliary power supply of 9 - 30V is required.

KCC Host KCC-BOX2

Ordinary central control host
● Ordinary central control host, with 5 RS485 interfaces and 1 reusable network interface.
● There are 15 switching circuits, among which 3 circuits are 16A high - load, 12 circuits are 10A lighting loads, and 6 circuits have 0/1 - 10V output.
● It can integrate the KCC solution with a variety of control units, and supports KNX IP Router and P2P modes.
● It can be applied to projects such as hotel rooms, small - sized apartments, and conference rooms.
● 24V auxiliary power supply is required.

KCC Host KCC-M1

Audio and video system host
● High - end home audio - visual host, equipped with 1 RS485 interface, 4 RS232 interfaces and 1 reusable network interface.
● Features a dedicated home theater APP, delivering a superior audio - visual experience.
● Enables centralized control of home theater devices, such as players, projectors, power amplifiers, etc.
● Requires an auxiliary power supply of 9 - 30V.

KCC Host KCC-D3

KCC host
● Three RS485 interfaces, one RS232 interface, and one reusable network interface.
● Logic control, voice control, remote control, and a visual APP are supported. It also supports KNX IP Router and P2P modes.
● It can be integrated with conference systems, central control systems, BA (Building Automation)/BMS (Building Management System).
● It can be integrated with systems such as central air conditioners, floor heating, fresh air systems, home theaters, and background music systems.

KCC Host KCC-D6

KCC host
● Six RS485 interfaces, one RS232 interface, and one reusable network interface.
● Logic control, voice control, remote control, and a visual APP are supported. It also supports KNX IP Router and P2P modes.
● It can be integrated with conference systems, central control systems, BA (Building Automation)/BMS (Building Management System).
● It can be integrated with systems such as central air conditioners, floor heating, fresh air systems, home theaters, and background music systems.

KNX Gateway KTS0-DALI

KNX DALI Gateway
● Single channel, supports 64 DALI ballasts, 16 groups, supports RGB/RGBW
● Supports DALI2.0 and DT8, with bus short circuit detection function, capable of detecting faults in ballasts and lighting fixtures
● The corresponding group address relationship has been integrated and can be used without assigning a group address
● 24V auxiliary power supply required

KNX Gateway TSE100

TUYA Graffiti Ecological Gateway
● With multiple connection methods, it can link the wireless system of graffiti with all wired systems, achieving seamless integration of wired and wireless
● To be used in conjunction with graffiti wireless access points
● Need to be used in conjunction with graffiti wireless access points

KNX Gateway TSE300

Apple Homekit Apple Ecological Gateway
● Apple HomeKit Apple Bridge, certified by Apple's official HomeKit and MFi
● One 485 interface, one 232 interface, one reusable network interface, or one KNX interface can be selected, with 4 interfaces to choose from
● 9-30V auxiliary power supply required

KNX Gateway KTS0-IP-VIEW

KNX APP Gateway
● Visual APP gateway, supporting Android and Apple systems, can be remotely controlled using WeChat mini programs
● Logic control, voice control, remote control, visualization app, supporting KNX IP Router and P2P mode
● Support control of lighting, underfloor heating, air conditioning, audio and video, backend timing, strategies and various logics, IP camera monitoring and video retrieval
● 9-30V auxiliary power supply required

KNX Gateway KTS0-IP-TCP

KNX TCP Server Gateway
● TCP gateway, integrated with third-party software as an IP data interface
● Supports KNX IP Router and P2P mode
● 9-30V auxiliary power supply required

KNX Gateway KTS0-IP-LOGIC

KNX timing/logical gateway
● Logical gateway, supporting backend timing, strategy, and various logical functions
● Supports KNX IP Router and P2P mode
● 9-30V auxiliary power supply required

KNX Gateway KTS0-KTCOM

Serial server gateway RS232 version
● Serial server gateway RS232 version, supports serial port transparent transmission, does not support Modbus
● 1 232 interface, logic control, can be used for user-defined bidirectional serial port code or KTS serial port transparent protocol
● Unrestricted number and byte length of serial port codes
● 9-30V auxiliary power supply required

KNX Gateway KTS0-DMX

DMX gateway
● DMA gateway, 1xDMX512 interface, supports 255 channel switches and dimming
● Supports 6 scenes, with a maximum of 64 channels per scene. The scene transition time can be set accordingly
● 24V auxiliary power supply required

KNX Gateway KTS0-IR

KNX infrared gateway
● Infrared gateway, 4 IR transmission channels+1 IR learning channel
● Each channel supports a maximum of 100 infrared commands and supports the full frequency range of 20kHz~75kHz
● Can use ETS or RS485 interface to learn and transmit infrared signals
● With scene functionality, it enables one click simultaneous sending of different infrared commands to different channels

KNX Gateway KTS0-MINI-485

Small KNX/485 gateway
● RS485 to KNX small serial gateway, supporting 46 instructions
● The baud rate setting range for serial port data is 1200bps~115200 bps · The frame length of serial port data can be set
● The serial data frame can be set to use the same frame header and frame footer (2 bytes each), so that the length of a single data frame can reach 12 bytes
● Supports hexadecimal and ASCII code commands (requires conversion to decimal)

KNX Gateway KTS0-MINI-SQ

KNX Project Management Module
● KNX project management module, can trigger blocking instructions after timeout
● Equipped with automatic storage and memory function, the device will not affect the current timing function after power is restored
● Timing can be done in seconds/minutes/hours/days, with a minimum of 1 second and a maximum of 255 days

KNX Host KTS-BOX2

KNX host
● KNX central control host, 5 485 interfaces, 1 reusable network interface, 1 KNX interface
● Can be integrated with air conditioning/underfloor heating/fresh air/background music/home theater/conference/central control/security/floor control systems, etc
● 24V auxiliary power supply required

KNX Host KTS-BOX3

KNX host
● KNX central control host, 5 485 interfaces, 1 reusable network interface, 1 KNX interface
● 15 switch modes, including 3 16A high-power loads, 12 10A lighting loads, 1 DALI dimmingoutput, supporting KNX IP Router and P2P modes
● Can be integrated with air conditioning/underfloor heating/fresh air/background music/home theater/conference/central control/security/floor control systems, etc
● 24V auxiliary power supply required

KNX Host KTS-D1

KNX host
● One RS485 interfaces, one RS232 interface, one reusable network interface, and one KNX interface
● Logic control, voice control, remote control, visual APP, supporting KNX IP Router and P2P modes
● Can be integrated with security alarms and access control systems.
● Requires 9 - 30V auxiliary power supply

KNX Host KTS-D2

KNX host
● Two RS485 interfaces, one RS232 interface, one reusable network interface, and one KNX interface
● Logic control, voice control, remote control, visual APP, supporting KNX IP Router and P2P modes
● Can be integrated with security alarms and access control systems.
● Requires 9 - 30V auxiliary power supply

KNX Host KTS-D3

KNX host
● Three RS485 interfaces, one RS232 interface, one reusable network interface, and one KNX interface
● Logic control, voice control, remote control, visual APP, supporting KNX IP Router and P2P modes
● Can be integrated with security alarms and access control systems.
● Requires 9 - 30V auxiliary power supply

KNX Host KTS-D4

KNX host
● Four RS485 interfaces, one RS232 interface, one reusable network interface, and one KNX interface
● Logic control, voice control, remote control, visual APP, supporting KNX IP Router and P2P modes
● Can be integrated with security alarms and access control systems.
● Requires 9 - 30V auxiliary power supply

KNX Host KTS-D5

KNX host
● Five RS485 interfaces, one RS232 interface, one reusable network interface, and one KNX interface
● Logic control, voice control, remote control, visual APP, supporting KNX IP Router and P2P modes
● Can be integrated with security alarms and access control systems.
● Requires 9 - 30V auxiliary power supply

KNX Host KTS-D6

KNX host
● Six RS485 interfaces, one RS232 interface, one reusable network interface, and one KNX interface
● Logic control, voice control, remote control, visual APP, supporting KNX IP Router and P2P modes
● Can be integrated with security alarms and access control systems.
● Requires 9 - 30V auxiliary power supply

KNX sensor KTE1AS

Temperature and humidity sensor
● Using KNX power supply and communication
● Can detect temperature and humidity
● Adopting a ceiling mounted embedded installation method
● After professional instrument calibration
● Temperature measurement range:- 40℃~85℃
● Humidity measurement range: 0%~100%
● Compact in size, with a diameter of 50mm
● After installation, the visible thickness is only 6mm

KNX sensor KTEAQS-CO

Carbon monoxide sensor
● Using KNX power supply and communication
● Can detect carbon monoxide
● Adopting a ceiling mounted embedded installation method
● After professional instrument calibration
● Measurement range: 0-1000ppm
● Compact in size, with a diameter of 50mm
● After installation, the visible thickness is only 6mm

KNX sensor KTEAQS-T3

KNX air quality sensor
● Comes with KNX interface
● Supports temperature, humidity, and PM2.5
● Requires 24V auxiliary power supply

KNX sensor KTEAQS-T7

KNX air quality sensor
● Comes with KNX interface
● Support temperature, humidity PM1.0、PM2.5、PM10、 Formaldehyde, CO2, and TVOC
● Requires 24V auxiliary power supply

KNX sensor KTE2MLS-W2

Wall mounted motion sensor
● Wall mounted motion sensor with constant illumination function, installed in 86 bottom box, default color is white
● The maximum detection distance can reach 8 meters
● Delay time and brightness threshold can be set
● Can enable/disable human body sensing function
● Can enable/disable constant illumination function
● The constant illumination control function can be activated through human body sensing

KNX sensor KTE2MLS-T

Ceiling mounted mobile sensor
● Ceiling mounted mobile sensor with constant illumination function, embedded in ceiling/86 bottom box installation
● The default color for infrared detection is white, with master-slave control and illumination detection function
● The maximum detection distance can reach 8 meters
● Suitable for corridors, elevator halls, bathrooms, and other places

KNX sensor KTE2MLS-T2

Ceiling mounted mobile sensor
● Ceiling mounted mobile sensor with constant illumination function, embedded installation in ceiling, compact size
● The default color for infrared detection is white (maximum detection distance can reach 5 meters)
● Equipped with master-slave control and illumination detection functions
● Suitable for places such as foyers, corridors, elevator lobbies, bathrooms, changing rooms, etc

KNX sensor KTE2MLS-T3

Multifunctional presence sensor
● Accurately output signals indicating the presence or absence of people
● The maximum range of movement/slight movement/presence sensing: 1-8 meters in diameter
● Support hidden embedded installation
● With a circular radiation pattern, it can effectively realize the full-space management of a single unit
● Realize intelligent sensing functions based on millimeter-wave radar technology
● Set the sensing parameters through ETS and remote control

Fancoil module KTE2F

Two tube fan coil driver
● Two tube fan coil driver
● Mainly used for intelligent control of two pipe fan coil systems
● Can turn on/off the "automatic control" function
● Acceptable ambient temperature and set temperature to automatically calculate temperature difference
● Automatically control valve opening/closing based on temperature difference

Fancoil module KTE4F

Four pipe fan coil drive
● Powered by KNX bus
● Can turn on/off the "automatic control" function
● Support cold and frost protection
● Acceptable ambient temperature and set temperature to automatically calculate temperature difference
● Automatically control valve opening/closing based on temperature difference
● Automatically control wind speed based on temperature difference

Curtain module KTE2UPC

2-channel curtain driver
● 2-channel curtain driver, dedicated dry contact input motor
● Suitable for passive dry contact curtain motor drive
● Can achieve curtain opening/closing/stopping, with status feedback function
● Dual channel design, suitable for most applications of gauze curtains and fabric curtains
● The interval time for switching between opening and closing curtains can be set to maximize the protection of the curtain motor

Curtain module KTE4HPC

4-way universal curtain driver
● Implementing actions such as opening/closing motor loads through the KNX protocol
● Powered by KNX bus
● DC24V auxiliary power supply is required for power supply
● 4 independent output channels
● Equipped with on/off status feedback function
● Equipped with position control and status feedback functions
● The interval time for switching between opening and closing curtains can be set to maximize the protection of the curtain motor
● Featuring scene functionality, each channel supports up to 8 sets of scene definitions
● Each circuit can be individually set with relevant parameters
● Manually control the opening/closing/stopping of each circuit
● Each circuit has an independent status display
● Support strong electric motors and dry contact motors

Input module KTE8UP

8-channel universal input module
● 8-channel universal input module, using embedded installation method, can be concealed in the switch bottom box
● Compact in size, powerful in functionality, convenient for application in various usage scenarios
● Can control lighting: on/off/dimming can control curtains: on/off
● Can send numerical values: scene call/brightness value/temperature value/illuminance value
● Can be connected to a self resetting switch to control the KNX system

Input module KTE824I

8-channel 24V active input module
● 8-way 24V active input module, rail mounted, can be linked with the fire protection system or docked with other systems
● Featuring 8 independent channels that can be individually controlled
● Can control lighting: on/off/dimming can control curtains: on/off
● Can send numerical values: scene call/brightness value/temperature value/illuminance value
● Can be linked with the fire protection system to control the KNX system
● Can be integrated with other system terminals or device hosts for connection

Dimmer module KTE45BD

4-channel thyristor dimming driver
● 4-channel thyristor dimming driver, with a maximum load of 500w per channel, using front-end bidirectional thyristor dimming
● Can be applied to incandescent lamps, low-voltage halogen lamps, and tube lamps/LED lamps with electronic adapters with thyristor input
● Dimming speed and activation time can be set, with scene function. Each channel can be independently controlled by switch and dimming

Dimmer module KTE41TD

4-channel thyristor dimming driver
● 4-channel thyristor dimming driver, with a maximum load of 1000w per channel, using cutting-edge bidirectional thyristor dimming
● Can be applied to incandescent lamps, low-voltage halogen lamps, and tube lamps/LED lamps with electronic adapters with thyristor input
● Dimming speed and activation time can be set, with scene function. Each channel can be independently controlled by switch and dimming

Dimmer module KTE4110D

4-channel 0/1-10V dimming driver
● 4-channel 0/1-10V dimming driver with relay on/off function
● Support dimming transformers that match the Current Source/Current Sink module
● Manually control the on/off/dimming of each circuit
● Support relative dimming command (4 bits)
● Supports absolute dimming command (1-byte)
● Scene function dimming speed can be set
● The speed of the switch gradient can be set, and the brightness can be set to turn on
● Requires 24V auxiliary power supply

D-Series KTE4TS-D

● D series, 4-key intelligent button panel
● Material: Plastic
● Human body sensing backlight indicator light
● 24V auxiliary power supply required

D-Series KTE4TS-DK4

● D series, 4-key intelligent button panel
● Material: Plastic
● Human body sensing backlight indicator light
● 24V auxiliary power supply required
● (K4) is equipped with four relay outputs

D-Series KTE6TS-D

● D series, 6-key intelligent button panel
● Material: Plastic
● Human body sensing backlight indicator light
● 24V auxiliary power supply required

D-Series KTE6TS-DK4

● D series, 6-key intelligent button panel
● Material: Plastic
● Human body sensing backlight indicator light
● 24V auxiliary power supply required
● (K4) is equipped with four relay outputs

S-Series KTE2TS-S

● S series, 2-key intelligent button panel
● Material: Metal
● Human body sensing backlight indicator light
● 24V auxiliary power supply required

S-Series KTE4TS-S

● S series, 4-key intelligent button panel
● Material: Metal
● Human body sensing backlight indicator light
● 24V auxiliary power supply required

S-Series KTE6TS-S

● S series, 6-key intelligent button panel
● Material: Metal
● Human body sensing backlight indicator light
● 24V auxiliary power supply required

KTEX8W-S

● S series, KNX three in one temperature control panel
● Material: Metal
● Built in temperature sensor
● 24V auxiliary power supply required

F-Series KTE4TS-F

● F series, 8-key intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel, etc
● Operation indication or circuit status indication

F-Series KTE4TS-FK

● F series, 8-key intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel, etc
● Operation indication or circuit status indication
● Human backlight sensing, (K) is an optional relay, with a maximum of three channels

F-Series KTE8TS-F

● F series, 8-key intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel, etc
● Operation indication or circuit status indication

F-Series KTE8TS-FK

● F series, 8-key intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel, etc
● Operation indication or circuit status indication
● Human backlight sensing, (K) is an optional relay, with a maximum of three channels

KTEX8W-F

● F series, KNX three in one temperature control panel
● Material: Metal
● KNX+24V auxiliary power supply
● Built in high-precision temperature and humidity sensors
● Can simultaneously control air conditioning/underfloor heating/fresh air
● Can display ambient temperature/humidity/PM2.5/CO2/TVOC, etc

M-Series KTE4TS-M

● M-series, 4-key KNX intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication
● Equipped with ToF human body proximity backlight sensing
● Optional button vibration function

M-Series KTE4TS-MK

● M-series, 4-key KNX intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication
● Equipped with ToF human body proximity backlight sensing
● Optional button vibration function
● (K) For optional relays, up to three channels are available

M-Series KTE8TS-M

● M-series, 8-key KNX intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication
● Equipped with ToF human body proximity backlight sensing
● Optional button vibration function

M-Series KTE8TS-MK

● M-series, 8-key KNX intelligent button panel
● Material: Metal
● KNX+24V auxiliary power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication
● Equipped with ToF human body proximity backlight sensing
● Optional button vibration function
● (K) For optional relays, up to three channels are available

KTEX8W-M

● M-series, KNX three in one temperature control panel
● Material: Metal
● KNX+24V auxiliary power supply
● Built in high-precision temperature and humidity sensors
● Can simultaneously control air conditioning/underfloor heating/fresh air
● Can display ambient temperature/humidity/PM2.5/CO2/TVOC, etc

Y-Series KTE4TS-Y

● Y series, 4-key KNX intelligent button panel
● Material: Plastic
● Single KNX bus power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication

Y-Series KTE4TS-YK

● Y series, 4-key KNX intelligent button panel
● Material: Plastic
● Single KNX bus power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication
● (K) For optional relays, up to three channels are available

Y-Series KTE8TS-Y

● Y series, 8-key KNX intelligent button panel
● Material: Plastic
● Single KNX bus power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication

Y-Series KTE8TS-YK

● Y series, 8-key KNX intelligent button panel
● Material: Plastic
● Single KNX bus power supply
● Switch, dimming, curtains, scene, dual channel control
● Operation indication or circuit status indication
● (K) For optional relays, up to three channels are available

KNX Touchpanel KTP40L

4-inch multifunctional capacitive touch screen
● Ultra thin 4-inch capacitive LCD touch screen with KNX interface
● Resolution 720x720
● Built in network service, configuration and programming can be completed using a browser
● Multiple themes to choose from (supports theme customization services)
● 9-30V auxiliary power supply required

KNX Touchpanel KTP70L

7-inch multifunctional capacitive touch screen
● Ultra thin 7-inch capacitive LCD touch screen with KNX interface
● Resolution 1024x600
● Built in network service, configuration and programming can be completed using a browser
● 9-30V auxiliary power supply required

KNX Touchpanel KTP100L

10-inch multifunctional capacitive touch screen
● Ultra thin 10 inch capacitive LCD touch screen with KNX interface
● Resolution 1280x800
● Built in network service, configuration and programming can be completed using a browser
● 9-30V auxiliary power supply required

KNX switch module KTE110/210/310MS

1/2/3 concealed opening and closing modules
● Embedded input - output small module, featuring 4 - channel DI (Digital Input) input, 4-channel DO (Digital Output) output, and 1-3 channels of 10A relay output
● The input ports can be used for lighting control: on/off / dimming
● The input ports can be used for curtain control: operation / stop
● The input ports can be used for numerical value sending: scene calling / brightness value / temperature value / illuminance value

KNX Switch module KTE04R-10K KTE04R-16K

4 way 10A switch driver/4 way 16A switch driver
● It has a scene function
● Each circuit has an independent status display and can be set with individual parameters
● After the KNX bus power failure, the circuits can still be controlled by manual buttons
● A 24V auxiliary power supply is required
● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE04R-16S

4 way 16A switch driver
● Mechanical toggle - switch driver with 4 channels of 16A
● It can maintain its current state even when the KNX bus experiences a power failure or malfunctions
● Manual control remains available after the KNX bus loses power
● It can be used for the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE04R-20S

4 way 20A switch driver
● Mechanical toggle - switch driver, with 4 channels of 20A
● It can maintain the current state even after the KNX bus has a power outage or malfunctions
● Manual control is still possible after the KNX bus loses power
● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE04R-20SA

4 way 20A switch driver
● Mechanical toggle - switch driver, featuring 4 channels of 20A
● The actual current magnitude of each channel can be detected
● It can maintain its current state even when the KNX bus experiences a power outage or malfunctions
● Manual control remains available after the KNX bus loses power
● It can be applied to the control of lighting, on - off type floor heating, and drycontact signals

KNX Switch module KTE08R-10K KTE08R-16K

8 way 10A switch driver/8 way 16A switch driver
● It has a scene function
● Each circuit has an independent status display and can be set with individual parameters
● After the KNX bus power failure, the circuits can still be controlled by manual buttons
● A 24V auxiliary power supply is required
● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE08R-16S

8 way 16A switch driver
● Mechanical toggle - switch driver with 8 channels of 16A
● It can maintain its current state even when the KNX bus experiences a power failure or malfunctions
● Manual control remains available after the KNX bus loses power
● It can be used for the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE08R-20S

8 way 20A switch driver
● Mechanical toggle - switch driver, with 8 channels of 20A
● It can maintain the current state even after the KNX bus has a power outage or malfunctions
● Manual control is still possible after the KNX bus loses power
● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE08R-20SA

8 way 20A switch driver
● Mechanical toggle - switch driver, featuring 8 channels of 20A
● The actual current magnitude of each channel can be detected
● It can maintain its current state even when the KNX bus experiences a power outage or malfunctions
● Manual control remains available after the KNX bus loses power
● It can be applied to the control of lighting, on - off type floor heating, and drycontact signals

KNX Switch module KTE12R-10K KTE12R-16K

12 way 10A switch driver/12 way 16A switch driver
● It has a scene function
● Each circuit has an independent status display and can be set with individual parameters
● After the KNX bus power failure, the circuits can still be controlled by manual buttons
● A 24V auxiliary power supply is required
● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE12R-16S

12 way 16A switch driver
● Mechanical toggle - switch driver with 12 channels of 16A
● It can maintain its current state even when the KNX bus experiences a power failure or malfunctions
● Manual control remains available after the KNX bus loses power
● It can be used for the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE12R-20S

12 way 20A switch driver
● Mechanical toggle - switch driver, with 12 channels of 20A
● It can maintain the current state even after the KNX bus has a power outage or malfunctions
● Manual control is still possible after the KNX bus loses power
● It can be applied to the control of lighting, on - off type floor heating,and drycontact signals

KNX switch module KTE12R-20SA

12 way 20A switch driver
● Mechanical toggle - switch driver, featuring 12 channels of 20A
● The actual current magnitude of each channel can be detected
● It can maintain its current state even when the KNX bus experiences a power outage or malfunctions
● Manual control remains available after the KNX bus loses power
● It can be applied to the control of lighting, on - off type floor heating, and drycontact signals

System Module KTEIPC

IP line coupler
● IP line couplers can connect to ETS through IP
● Can be used as a regional/line coupler
● Can be used as an IP router to improve KNX communication speed
● Equipped with filtering table function: supports filtering the first place of group addresses
● 9-30V auxiliary power supply required

System module KTE640P

640mA power module
● The 640mA power module is a standard KNX system power supply equipment
● Built in choke
● High efficiency, approximately 85% effectiveness
● Equipped with short-circuit protection function, overload protection function, overheating protection function
● Equipped with a restart button and indicator light

System module KTEUSB

KNX/USB data interface
● Using KNX bus for power supply
● Installation using DIN rail method
● No programming required, plug and play
● Equipped with connected LED indicator lights
● Equipped with standard USB Type-A interface

System Module KTELC

Branch coupler
● Can be used as a regional/line coupler
● With filtering function
● Powered by KNX bus

KTEC2208

● KNX/EIB dedicated bus

KTS-12P

● 12V output switch power supply
● Output current is 1A

KTS-24P

● 24V output switch power supply
● The output current is 2.5A

KTEBLOCK

● KNX/EIB dedicated terminal

System module K-PC

● Input 24-30V DC power supply, output 640mA KNX power supply

传感器 KTE2MLS-W

人体感应器，侧墙安装，可调节亮度感应值和延迟时间